Seafoam harley davidson

Seafoam harley davidson DEFAULT

When you think of Harley-Davidson, you probably think of growling fat hogs that guzzle gas and leak oil. But Tong Xin Jun has seen the future of Harleys and it is bright and clean. What you are looking at is a color-modded render utilizing some parts you wouldn’t readily think to use. You may recognize a Mindstorms EV3 Ultrasonic Sensor just over the front tire and Technic actuators act as shock absorbers. Unless there is a stash of odd-colored parts that I don’t know about, this sea-foam green, orange, white, pearl gold, light gray and dark gray combination can’t quite work in real brick with this model. Still, it is an inspired choice by the builder and lends to a sleek, futuristic feel to the bike.

Harley Davidson FullOrbit™ (Left Side)

Here is an alternate view better showcasing those transparent piston cylinders. It would be neat if motorcycle tires came in anything but black, but for now, computer rendering, photo manipulation, or some good old paint are the only ways to get that done.

Harley Davidson FullOrbit™ (Right View)

Like this article? Tell all your friends!



Motorcycle Forums » Harley Davidson

  • November 10, 2010 12:59 PM PST
    Any thoughts on this product?
    Have many of you used it?
    I've been reading/researching this stuff, and it seems to be the best thing for your bike (inside & out) , since the invention of Slice Bread!
  • November 10, 2010 2:08 PM PST
    I've been using this stuff for going on 20 years & swear by it! When condensation is a problem ( the boat) a bit added to the gas & smoothes right out!
  • November 10, 2010 2:54 PM PST
    Never even heard of it until just now. I just read up on it and it does sound like some pretty amazing stuff - provided their claims are true. I'm interested to know how many have tried it in or on their motorcycle?
  • November 10, 2010 3:52 PM PST
    Yea Lucky,....I really don't remember how I came upon it, anycase, after some moderate reading ....I soon went to YT and listened (watched) people applying it or using it....despite my bike having relatively low miles (7500) , I was considering using it....
    and thought others may have tried it and was hoping to get their results.....
  • November 10, 2010 10:47 PM PST
    I have also been using Seafoam for many years. Add it to every other tank of gas. It does a great job in cleaning the carbs and keeping the bike running smooth. I also when winterizing the bikes drain about a half quart of oil then add a half of quart of seafoam and run the bike until hot. Then drain then change oil /seafoam and filter. Even if your oil is clean, after you run seafoam through the engine you would not believe how dirty it comes out. Just cleans all the sludge from the engine. Have been doing this for years with no problem and great results. Restoring a 78 goldwing and after doing this a couple times the engine looks almost new when I was tearing it down. I swear by the stuff.
  • November 10, 2010 11:57 PM PST
    I have also used Seafoam in a chainsaw that had set for 2 yrs with mixed fuel in the tank.. Added to the fuel and let it set for a week. Choke flooded the engine and let it set for a week. Dumped the tank filled and changed the plug and started. ???? Added to new fuel and no problem.. Did Run the saw empty this time before storeing..
  • November 12, 2010 12:21 AM PST
    Ok ....thanks to you all for the responses.... I was just a bit hesitant on investing in something that seemed so "one fix does it all' type of thing.....
  • November 12, 2010 4:44 AM PST
    My intake valves started tapping around 30k on my v-star, I got one can and added 1/3 of the can to each of the next 3 tankfulls of gas and the tapping went away and the motor was noticeably smoother.

    And as Badirish said, it is wonderful for cleaning the crankcase.
  • November 12, 2010 5:39 AM PST
    I used it in an old Ranger pick-up. It really made it run better.
  • November 12, 2010 11:46 AM PST
    This is one "mechanic in a can" that I trust. It works in every application I've tried it on. Worst was a Chevy 6 banger from 1956. When I pulled the valve cover you almost couldn't see the rockers it was so full of goop. Put the cover back on & poores 2 cans in, ran it for about an hour, drained oil & did it again 3 more times, pulled cover off & things looked way cleen. Turned into a smoth clean rebuild.
  • November 13, 2010 2:47 AM PST
    OK, now you have me curious. What is this stuff? I've never heard of it before. Where do you get it?
  • November 13, 2010 12:25 PM PST
  • November 14, 2010 3:46 AM PST
    Well guys, I put the SeaFoam in my bike this morning - (in the gas & crankcase).... My engine sputtered a bit on start it....but after a 5 minutes, it cleared out the exhaust.......afterwards, I took my bike for a/b 100mile run to test it out. My engine seems to be running smoother, other than that ...I don't know what to think a/b it.... lol!
    .... but after the reading the reports here and elsewhere, I'm glad I put it in my bike.
    I consider it 'cheap' insurance.... thanks everybody for the feedback, much appreciated!
  • November 14, 2010 4:15 AM PST
    Any thoughts on this product?
    Have many of you used it?
    I've been reading/researching this stuff, and it seems to be the best thing for your bike (inside & out) , since the invention of Slice Bread!

    I've used it for about a year now in my truck, car and finally trust it enough to put it in my Ultra Classic.

  • November 14, 2010 5:09 AM PST
    i have used seafoam for fuel injection services in automotive applications, results were varied due to the different styles of injection systems, but across the board, there was improvement.
  • December 8, 2010 10:50 PM PST
    I have been using Sea Foam for well over 10 years. Started using it on bikes that I restored that have been setting and the fuel had jelled. Also used it on older bike that have not been run that much. I swear by it.
  • December 10, 2010 12:13 AM PST
    I also have been using Sea Foam for many years now. I add it to my HD, and Vulcan 3 to 6months depending on the use. It has made a difference in the performance of the bikes,especially the fuel injected HD. With the addition of alcohol in the fuel, Sea Foam has helped to keep my performance up and hopefully everything clean in the combustion chamber. I have also used it in my vehicles, sure made a difference in my Ford Sport Trac. I would recommend it.
  • December 14, 2010 10:51 AM PST
    Awsome Stuff!
    I Highly recommend   it to everyone I know.
  • December 14, 2010 8:34 PM PST
    I use it in everything i drive, truck Bike Lawnmower Boat anything that has a motor and a carb Seafoam is a life saver and money saver in the long run HIGHLY RECOMENDED by alot of mechanics as well
  • December 18, 2010 12:58 AM PST
    I use it in everything from the lawnmower to my boat. Did an experiment a couple of years ago on my C-90. Tracked mileage with and without Seafoam. I DID see a significant difference when using it. So now I add some in every other tank of gas. I'm sold on the stuff !!!
  • January 11, 2011 12:58 AM PST
    Never heard of it either. Might give it a try since I trust you guys :)
  • January 11, 2011 2:25 AM PST
    I have a riding bud that swears by it and uses it in his bike all the time.
  • January 11, 2011 2:40 AM PST
    You guys have me convinced, there a can now in the garage wait to be used. Will try it on my truck this weekend and the bike once it out of winter storage.
  • January 13, 2011 7:53 PM PST
    Any issues with air management systems (fuel injection/exhaust computers or sensors)?
  • February 25, 2011 1:30 PM PST
    I had to start using sea foam when uncle Sam started adding ethanol to gasoline. Picked up on it after finding out pickup truck owners used it every other tank of gas to clean the tank and carburetor out. Found out other bikers used it to clean the gas tank up as well. It really helps. It makes the gas have more octane and all one has to do is add just a quarter cup of sea foam per gallon. It really helps my iron head run better
       A Harley Davidson Iron Head Drag Bike Fuel Petcock might help me win.
  1. Fashion croquis
  2. Ska sheet music
  3. Koala worksheet
  4. Exam pics

Should I use fuel injector cleaner in my Harley Davidson?

Yes it is a good idea to add an injector cleaner once in a while. Since I store my bikes with StaBil in the tank over winter it is also a good injector cleaner so for me no need to do anything else. Injectors get dirty from the blow by before the intake valve closes.

Click to see full answer.

Considering this, is it OK to put fuel injector cleaner in a motorcycle?

Like motor vehicles, fuel injector cleaners are best poured in the fuel tank of motorcycles when the bikes have little fuel in their system. You can buy fuel injector cleaners from Amazon or any auto shop. The fuel economy of your bike may improve. The emission of your motorbike may reduce.

Beside above, what is the best fuel treatment for motorcycles?

  • Chevron Techron Concentrate Plus.
  • Red Line Fuel Cleaner.
  • Liqui Moly 2007 Jectron.
  • STP Super Concentrated Fuel Injector.
  • Lucas 1 Gallon Fuel Treatment.
  • Royal Purple Max Clean.
  • Gumout High Mileage Fuel Injector Cleaner.
  • BG 44K Fuel System Cleaner.

Subsequently, one may also ask, does seafoam fuel injector cleaner work?

It works through fuel injectors and carburetors to remove harmful residues and deposits from fuel passageways, intake valves, pistons, and chamber areas. Made from petroleum ingredients, Sea Foam is safe and effective when used in all types of gasoline or diesel fuels and fuel blends.

Can you use Lucas Fuel Treatment in a motorcycle?

Lucas designed this Motorcycle Oil Stabilizer to control heat and wear in high performance motorcycles. Excellent for reducing friction, increasing compression for enhanced fuel mileage. Eliminates dry starts, the #1 cause of wear in motorcycle engines. Also perfect for Harley Davidsons, ATV's and UTV's.

Hiccup Harley gets a Seafoam Enema - 2007 Harley Davidson Softail Custom

I thought, - a prominent guy and that. - To fall for an old one, - although such I myself am not an Incident. I've always wondered how the one who looks feels. Doesn't he really feel anything and does not understand that his lustful gaze is open and desires lie on the surface.

Harley davidson seafoam

Nevermind. I haven't heard anything. Nora and I are in Moscow. Judging by your answer, Kostya is not at home.

Part 4 Seafoam Injection

The opposite door opened and Keti entered. She was wearing a short black robe, belted with a leather belt and slippers. Long black hair was loose.

You will also be interested:

Don't worry sonny. You are already an adult, so you can go. I was satisfied with the reaction of my mother, because she is a gentle and rather progressive-minded person, unlike my grandmother.

862 863 864 865 866