Rope grow lights

Rope grow lights DEFAULT

Introduction: How to Make DIY Grow Lights With LED Strip Lights

Taking care of plants is a pleasurable activity that can provide food for a family or offer a portal to nature within the home.

LED lights provide a rich, full spectrum light, and are extremely energy efficient. Another benefit of LED grow lights is that they provide even, directional light distribution and emit very little heat — leading to a less expensive garden with greater yields or more robust growth. Here's a guide for building a DIY LED grow light using Flexfire LEDs strip lights.

Step 1: Gather the Tools

DIY LED Grow Light Parts:

  • UltraBright™ 24v Architectural Series LED strip lights*
  • Aluminum bars for heat dissipation
  • Adhesive pads
  • Silicone
  • RTV silicone
  • Nylon ties
  • Solderless LED strip connectors (strip-to-strip and strip-to-power)
  • Female coaxial connector with screw terminals for wiring
  • 24v LED strip light power supply

* Even when working in an indoor environment, consider water resistant Outdoor 24v Architectural LED strip lights to protect against humidity and also allow for easier cleaning

Step 2: Attach LED Strips to the Aluminum Bars

Start by cutting the strip lights to match the width dimensions of your project. Check for markings after every third chip to locate the appropriate place to make your cut. After that, peel off the paper over the adhesive backing and attach the strips along the aluminum bar mounting. The aluminum will act as a heat sink, protecting your plants from excess heat and extending the lifespan of the LED chips.

From here, attach solderless connectors to the strip lights. For added stability, tie down the wires with a nylon tie and apply a silicone blob over the connection for insulation.

Step 3: Install the Aluminum Bars Fitted With Strip Lights

Place the bars in parallel over the desired grow space. Adhesive pads at the end of the bars will secure the lights above the sides of the indoor garden frame. The bars can be bolted to the frame to add strength to the light set-up’s structure. For an even distribution of light, space the light bars evenly over of your garden.

The most straightforward method to wire your lights it to connect one strip to the power supply, and then run strip-to-strip connectors from the end of each strip to the next. This method will allow you to run up to 32 feet of strips and wiring off of one power supply. To connect the first strip to the power supply, screw the wire end of the strip-to-power connector into a female coaxial connector. Then plug the coaxial cord into the power supply’s male connection. To turn on the lights, simply plug the power supply into to any wall outlet.

The Daily Light Integral (DLI) requirements of the plants you are growing will determine how many LED strip lights to use. Take PAR readings in your indoor garden to make sure you have the right amount of light to meet the demands of your plants.

Be the First to Share

Did you make this project? Share it with us!

Recommendations

  • Back to School: Student Design Challenge

    Back to School: Student Design Challenge
  • Halloween Contest

    Halloween Contest
  • Robots Contest

    Robots Contest
Sours: https://www.instructables.com/How-To-Make-DIY-Grow-Lights-With-LED-Strip-Lights/

Apollo Horticulture Pair of 1/8" Adjustable Grow Light Rope Hanger w/ Improved Metal Internal Gears

Apollo Horticulture Rope Hangers

Tired of hanging by a thread? We’ve got you covered.

Apollo Horticulture would like to introduce our new compact, highly durable rope hangers to our sprouting family of light accessories. For all your securing needs, our rope hangers will support everything from the most heavy duty to the most delicate pieces of your grow room equipment so you won’t have to worry about a budge, slip, or fall.

Our easy-to-use suspension system is a real snap – Simply clip, pull and lock!

Excellent for hanging light fixtures, reflectors, carbon filters, ventilation equipment, potted flowers and plants, fans and more!

Key Features:

  • Pair of 1/8” Heavy Duty Rope Hangers
  • Weight Capacity – 150 pounds
  • Rope Length – 7 Feet 7 Inches
  • Rope Material – Braided Polypropylene
  • Hook Material – Zinc Plated Steel
  • Internal Gears – 100% Stainless Steel - Rust Free!
Sours: https://www.amazon.com/Apollo-Horticulture-Adjustable-Improved-Internal/dp/B0098R0600
  1. Kardia amazon
  2. Fedex weekend shift
  3. Junk journal prompts

LED grow light strips are the last thing that come to mind, for those avid plant lovers that simply prefer having their plants outdoors. However, as winter closes in, one must think of alternatives to preserve and keep their plants alive indoors.

When it comes to indoor farming, it’s totally a different ball-game particularly in the lighting department. Which is why grow lights come into the picture.

In this article, we will provide and review the top 10 grow light strips (LED-based) that offer the best lighting needs for your plants to achieve optimal photosynthesis. We combed through tens of light strips and narrowed down the 10 best ones. At the end of this guide, you will be well equipped and know what important features to look out for when choosing grow light strips for your plants.

This page contains affiliate links, and as an Amazon Associate we earn from qualifying purchases which means we receive a small commission when you make a purchase, at zero cost to you.

The 10 Best LED Grow Light Strips

Monios-L T8 LED Grow Light Strips Review

  • Super high brightness
  • Lightweight
  • Not hot even after prolonged use
  • Customizable design
  • Low electricity usage, high output
  • 2 Connection Options – Connecting cords or Connectors
  • On the pricier side
  • Seldom restocked, so grab it while you can!

If you think the Monios-L 6-Pack T5 is amazing, the Monios-L 6-Pack T8 will blow your mind.

Features and Specifications

  • Packed with not one, but two rows of high-quality full spectrum LED chips housed in a V-shaped tube, this professional T8 LED Grow Light Strip has double the brightness of a regular LED grow light strip – at 2,300 lumens.
  • A high output grow light at 24W for each bar, producing more Photosynthetic Photon Flux Density (PPFD) which effectively promotes photosynthesis.
  • Compared to other grow light fixtures, it has a wider beam angle, thus increasing the effective coverage of lighting by up to 55%.
  • It also has a higher PAR value, making it perfect for plant seedling, growth, flowering and fruiting.
  • The Monios-L 6-Pack T8 provides indoor plants with full-spectrum light with wavelengths from 400nm to 800nm.
  • It has a Color Rendering Index (CRI) of 97.4, which undoubtedly makes it a very good choice for sunlight replacement.
  • It also has a color temperature of 3,700K, making it a warm white light, which is gentler on the eyes than the dizzying red and blue LED grow lights.
  • It comes in aluminum housing which is highly efficient in heat dissipation, thus ensuring a longer service life of the LED chips.

Installing the Monios-L 6-Pack T8 is easy. You can connect up to a maximum of 6 tubes with seamless connectors or connector cables for an extendable design. Therefore, it is suitable for various installation areas such as plant shelves, plant tents, hydroponics growing rooms, greenhouses, and so on, making it ideal for commercial growers and home gardeners.

What’s in the Package

Monios-L provides 3 easy self-installation options: self-adhesive pads, cable ties, and screws. With these, it is easy to fix the Monios-L 6-Pack T5 onto iron frames, shelves, and smooth wooden panels. The package also includes 5 connecting cords of 20 inches each for easy and flexible assembly.

Monios-L also provides 24 months unlimited warranty for the Monios-L 6-Pack T8, and they are able to quickly and easily replace damaged items upon request.

Barrina T5 LED Grow Light Strip Review

  • Full-spectrum lighting, similar to natural sunlight
  • Long lifespan, able to withstand long duration of usage
  • High PAR value
  • Not hot even after prolonged use
  • Independent power switch on each light
  • Low electricity usage, high output
  • Lightweight
  • Slightly pricier than other grow light strips in this list

The Barrina T5 is a full spectrum grow light that provides light which closely resembles natural sunlight. Compared to HPS/MH, the Barrina T5 has higher energy efficiency but lower consumption. It is one of the best grow lights for plants seeding, growth and bloom.

Features and Specifications

  • It consumes only 80W and has 400 LED chips in total, and is able to replace general 500W plant lights. Over 95% of the light energy produced by this grow light can be absorbed by plants.
  • Each light has its own power switch on the light itself, so you can easily control each light independently.
  • There are 4 power cords in each package, allowing for easy power-up and eliminating complex and hazardous installation process.
  • The setup is as simple as plug and play. You could link up to 16 lights together with 20-inch connecting cords or small connectors.
  • It has a color temperature close to 5,600K, closely resembling that of natural sunlight, which is gentler on the eyes than the dizzying red and blue LED grow lights.

What’s in the Package

Barrina provides 3 easy self-installation options: double-sided tape, cable ties, and clips. With these, it is easy to fix the Barrina T5 onto iron frames, shelves, and smooth wooden panels. The package also includes 7 connecting cords and 8 small connectorsfor easy and flexible assembly.

Furthermore, Barrina provides 24 months unlimited warranty for the Barrina T5, and they are able to quickly and easily replace damaged items upon request.

Sondiko Grow Light Strips Kit Review

  • Best budget grow light
  • Full-spectrum lighting
  • Not hot even after prolonged use
  • Lightweight
  • Customizable design
  • Easy and minimal setup
  • Some customers complain of short lifespan – however, can be replaced under warranty

The Sondiko Light Strips Kit is one of the top lighting solutions for commercial growers and home hobbyists alike. It offers full spectrum lighting, which makes it stand out from the typical red-and-blue LED grow lights in the market.

Features and Specifications

  • This Sondiko Kit offers full spectrum light which contains all wavelengths of light from 380nm to 838nm, delivering more highly-uniform light needed by plants compared to single red and blue spectrum LED grow lights in the market.
  • This grow light with certified top-quality power adapter is made of aviation aluminum which is a heat conductive material that effectively accelerates heat dissipation.
  • It has high PPFD value of 99.93 μmol/m2/s at 7.87-inch height which is great for vegetables, flowers, succulents, verbena plants, and so on.
  • The 4 light strips can be daisy-chained together through connecting cables or extension cables for an extendable design.
  • Setup is minimal and easy. There are multiple options for mounting such as cable ties, screws, magnets, and adhesive pads.

What’s in the Package

Sondiko provides 4 easy self-installation options: magnets, adhesive pads, cable ties, and screws. With these, it is easy to fix the Sondiko Kit onto cabinets, shelves, wall, and more. The package also includes 3 extension cables for easy and flexible assembly.

Sondiko also provides 12 months unlimited warranty for the Sondiko Kit, and they are able to quickly and easily replace damaged items upon request.

Monios-L 6-Pack T5 Review

  • High brightness
  • Lightweight
  • Not hot even after prolonged use
  • Lights are well-balanced and focused
  • Independent power switch on each light
  • Customizable design
  • Low electricity usage, high output
  • 2 Connection Options – Connecting cords or Connectors
  • Slightly pricier than other grow light strips in this list

The Monios-L 6-Pack T5 is Amazon’s Choice, and it’s no wonder why. This high-brightness 10W LED grow light is power-packed with 96 high-performance LED chips in each tube that puts other LED grow lights to shame.

Features and Specifications

  • Each LED chip of the Monios-L 6-Pack T5 is capable of emitting light with a spectrum from 380nm to 780nm. Therefore, it does not have separate red, blue or white LEDs like other red-and-blue LED grow lights.
  • The Monios-L 6-Pack T5 has a color temperature of 1500K and brightness of 1200 lumens.
  • It has high PAR value which is great for vegetables, flowers, succulents, verbena plants, and so on.
  • Besides, it uses high quality aluminum housing, which is excellent in heat dissipation and remains cool even after prolonged hours of usage.
  • Each light has its own power switch on the light itself, so you can easily control each light independently.
  • The 6 light tubes can be connected together through seamless connectors or connector cords for an extendable design. The light also comes with 3 power cords, so it can be installed in any position you want.
  • For only using 10 watts each, these grow light strips produce lots of light that are well balanced and focused.

What’s in the Package

Monios-L provides 3 easy self-installation options: self-adhesive pads, cable ties, and screws. With these, it is easy to fix the Monios-L 6-Pack T5 onto iron frames, shelves, and smooth wooden panels. The package also includes 5 connecting cords of 20 inches each for easy and flexible assembly.

Furthermore, Monios-L provides 24 months unlimited warranty for the Monios-L 6-Pack T5, and they are able to quickly and easily replace damaged items upon request.

Lightimetunnel T5 LED Grow Light (6 Pack) Review

  • Lightweight
  • Not hot even after prolonged use
  • Customizable design
  • Comes with cyclical memory timer
  • Adjustable brightness levels
  • Advertised as 10W per bar but mentioned as 5W per bar in the manual
  • Double-sided tape doesn’t work well

Lightimetunnel T5 LED Grow Light (4 Pack) Review

  • Lightweight
  • Not hot even after prolonged use
  • Customizable design
  • Comes with cyclical memory timer
  • Adjustable brightness levels
  • Advertised as 10W per bar but mentioned as 5W per bar in the manual
  • Double-sided tape doesn’t work well

The Lightimetunnel T5 LED Grow Light comes in 2-bar set, 4-bar set and 6-bar set. It has 16 red and blue LED light chips in each bar which produces the spectra needed for a plant’s growth. In this review we are focusing only on the 4-bar set and 6-bar set.

Features and Spectifications

  • The timer can be adjusted to automatically switch on or off after every 3 hours, 6 hours, or 12 hours depending on the needs of the plants. It is a cyclical memory timer which allows you to set and forget.
  • The brightness of the light strips can be adjusted to either 25%, 50%, 75%, or 100% according to the requirements and growing stages of the plant.
  • The power unit has 2 outlets, so there is an option to add additional light grow strips.
  • The Lightimetunnel T5 LED Grow Light has a high PPFD value at 119.8 umol/m²s (79.87 umol/m²s for 4-bar set) hanging at 6-inch height which allows for deep penetration of light to support better plant growth.
  • They allow for flexible installation – either linear or parallel.
  • The well-designed aluminum-body has good heat dissipation which ensures a long lifespan for the Lightimetunnel T5 LED Grow Light strip.
  • The Lightimetunnel T5 LED grow light has over-current, over-heating, over-voltage protection and certified by FCC, CE.

What’s in the Package

Lightimetunnel provides a roll of double-sided tape and cable ties for easy installation of the Lightimetunnel T5 LED grow light. Besides, a 12-month warranty and 30-day return guarantee is also provided by Lightimetunnel.

Litever LED Light Strip Kit Review

  • Affordable grow light
  • Provides the spectra necessary for plants growth
  • Not hot even after prolonged use
  • Customizable design
  • Optical lens for focused and concentrated lighting
  • Least number of LEDs per strip in this list

The Liteever LED Light Strip Kit is a great grow light for those who are on a budget. With a decent 9.6W and PPFD value of 99.93 μmol/m2/s per strip at a distance of 7.87 inches, this grow light is sufficient for most indoor plants.

Features and Specifications

  • It is made of specially-designed LEDs with optical lens to produce uniform lighting for plant growth.
  • Therefore, there is no obvious red or blue light bands. Instead, it produces more focused and concentrated lighting.
  • The Liteever LED Light Strip Kit has a high PPFD value at 99.93 umol/m²s hanging at 7.87-inch height which allows for deep penetration of light to support better plant growth.
  • The setup is easy to DIY. The 4 pcs light strips can be connected in a linear or parallel way.
  • There is no on/off switch for the grow light. Therefore, it is recommended to connect the grow light to a timer outlet.
  • The 4 light strips can be daisy-chained together through connecting cables or extension cables for an extendable design.

What’s in the Package

Liteever provides 3 easy self-installation options: self-adhesive pads, cable ties, and screws. With these, it is easy to fix the Litever LED Light Strip Kit onto iron frames, shelves, and smooth wooden panels. The package also includes three 1.5m extension cables for easy and flexible assembly and a 60W 24V/2.5A power adapter.

Liteever also provides 24 months unlimited warranty for the Litever LED Light Strip Kit, and they are able to quickly and easily replace damaged items upon request.


Roleadro LED Grow Light Strip (4 Pack) Review

  • Full-spectrum lighting
  • High PAR value
  • Automatic On/Off Cycle Timer
  • Not hot even after prolonged use
  • 4 brightness levels
  • Easy & minimal setup
  • Lightweight
  • Slightly pricier than other grow light strips in this list

Roleadro LED Grow Light Strip (6 Pack) Review

  • Full-spectrum lighting
  • High PAR value
  • Automatic On/Off Cycle Timer
  • Not hot even after prolonged use
  • 4 brightness levels
  • Easy & minimal setup
  • Lightweight
  • Slightly pricier than other grow light strips in this list

The Roleadro LED Grow Light Strip is an efficient and bright grow light, boasting high PAR value and luminous efficiency of up to 98%. It comes in a 2-bar set, 4-bar set and 6-bar set. In this review we are focusing only on the 4-bar set and 6-bar set.

Features and Specifications

  • The Roleadro LED Grow Light Strip is equipped with 96 full spectrum LEDs ranging from 400nm to 700nm. It is able to efficiently shorten the plant growth cycle and increase the yield to a greater degree.
  • It comes with automatic On/Off and timing function switch and adapter. Not only can you set it up for lighting every 3/6/12 hours, but you can also adjust the brightness of the light, according to plant needs. Set up once and it will turn on and off automatically every day.
  • With 4 brightness levels of 25%, 50%, 75% and 100%, you can adjust the brightness according to the different growth stages of plants, be it for starting seedlings, germination, vegetative, or flowering purposes.
  • The Roleadro LED Grow Light Strip boasts a high PAR value of 239.6 umol/m²s hanging at 6-inch height. The high PAR value combined with deep penetration makes it ideal to support better plant growth.
  • The installation kit allows for daisy chain design by connecting the light strips in a linear line. Optionally, you can connect the light strips in parallel to increase the lighting for your plants.
  • The Roleadro LED Grow Light Strip has over-current, over-heating, and over-voltage protection. It is perfect for all indoor plants, food production, plant propagation, indoor gardening, indoor hydroponics and horticultural applications.

What’s in the Package

Roleadro provides 2 easy self-installation options: double-sided tape and cable ties. With these, it is easy to fix the Roleadro LED Grow Light Strip onto cabinets, plant shelves, wall and plant growing system. The package also includes a long 5ft power cable and 5 extension cables of 16 inches each for easy and flexible assembly.

Furthermore, Roleadro provides 12 months unlimited warranty and 30 days free return guarantee for the Roleadro LED Grow Light Strip, and they are able to quickly and easily replace damaged items upon request.

OxyLED Grow Light Strips Review

  • Powerful 15W LED grow light
  • Convenient On/Off Timer available
  • Not hot even after prolonged use
  • Great for starter or small indoor gardens
  • No guaranteed warranty
  • Lower quality than others in this list

The OxyLED Grow Light Strips is a powerful 15W LED grow light with an efficient combination of blue and red light that delivers targeted spectra of 450-460nm and 650-660nm.

It is suitable for:

  • Indoor plants grown at home or in greenhouses or during winter
  • Accelerating the growth of seedlings and succulents
  • Improving the germination success rate of the plant

Features and Specifications

  • There are in total 27 blue LED chips that are good for photosynthesis, and best for promoting stem and leaf growth. There are also 81 red LED chips that are essential to a plant’s early life for seed germination, root growth, and bulb development. It also makes the plant yield better results when flowering.
  • The OxyLED Grow Light Strips come with 5 levels of adjustable brightness that can be easily dimmed from 20% to 100%, making it convenient to provide the ideal brightness to plants at different stages of growth.
  • It also has a super convenient Auto Turn On and Off Timer that allows you to turn the LED grow light on and off at a preset time.
  • The OxyLED Grow Light Strips are made from heat conductive aluminum alloy with passive heat dissipation. Heat is reduced quickly and the lamp stays cool even after 48 hours of continuous use. These LED plant strips do not heat up even after 24 hours of constant use so that your indoor plants are not damaged and the plant light lasts longer.

What’s in the Package

OxyLED provides 2 easy self-installing options: nails and cable ties. With these, it is easy to fix the OxyLED Grow Light Strips to iron frames, shelves, and smooth wooden panels.

Red and Blue Lights in LED Grow Lights

Effect of Red Light on Plants

Red light is radiation with wavelengths between 620 and 750 nm. These wavelengths are within the visible spectrum and red light has a pronounced effect on both photosynthesis and flowering.

However, plants grown under only red light may not have the desired characteristics. For example, plants grown with only red light can have skinny, stretched stems (“etiolation”) with fewer leaves. This is particularly true if the plants are young.

Effect of Blue Light on Plants

Blue light is radiation with wavelengths between 450 and 495 nm. These wavelengths are within the visible spectrum and blue light has a pronounced effect on photosynthesis, plant height, and flowering.

However, blue light is less effective than red light for driving photosynthesis. In addition to playing an important role in photosynthesis, blue light is well known to suppress stem elongation (“stretching” or etiolation). Plants grown with blue light are usually shorter and have thicker, and denser leaves compared to plants grown without blue light.

Ideal Combination for LED Grow Light Strips – Red and Blue Light

Red light should be used in conjunction with blue light to increase photosynthesis and plant size.

Although a plant can be grown using just red or blue light, most plants have faster growth with a broader spectrum of light. Red light can be used in conjunction with blue light.

Both red and blue light are more efficiently absorbed by photosynthetic pigments compared to other regions of the spectrum. The red-blue combination allows for a faster rate of photosynthesis than either red or blue light alone.

Compared to red or blue light alone, the red-blue light combination also increases plant size, leaf number, leaf size, and chlorophyll content.

Depending on the plant species, the ideal ratio of red: blue light varies.

(Credits to http://ursalighting.com)

You can also check out the reviews on Mars Hydro TS 1000, one of our most recommended grow lights for your succulent needs.

If you have further questions about grow lights, we answer them here.

Sours: https://succulentalley.com/top-10-led-grow-light-strips/
DIY 12V LED Grow Light Build

LED Grow Light Strips (Best For Veg/Clone & Supplemental)

Best LED Grow Light StripWant to light your plants from an unusual angle, but can’t figure out how?

Or do you have a limited space for lighting?

LED grow light strips solve both problems with ease.

Whether they are the flexible kind with adhesive on the back, or the rigid strip kind, LED strips offer the ultimate flexibility.

You can put them virtually anywhere and in any position.

The one big problem?

There are tons of brands making them, but most are pretty worthless.

So how do you know the difference?

Research. Hours and hours of research.

But who has time for that?

That’s why I did the research for you. I sifted through all the worthless LED strips on the market and found the best in each category.

Now all you have to do is figure out which type of strip lighting is best for you and check out my recommendation for that type.

 

LED Grow Light Strips Compared

Here’s a quick summary of my findings. If you’re curious why I recommend these lights, you’ll find brief reviews for each below.

 

Why Use LED Grow Strips?

In short: flexibility. You can install these lights anywhere and in any position.

That makes them perfect as supplemental lighting or as the primary lighting for small veg or clone rooms.

Used as supplemental lighting, you can easily place them on the walls of your room to light your plants from the sides or on the floor to get light on them from the bottom.

One great use is to line the sides of the tent where the walls meet the floor and/or the ceiling with strip lights.

In a veg/clone/seedling room, you can use several strips of cool white light above the plants. They give off very little heat, so you can hang them very close, allowing you to grow in tiny spaces.

You can easily stack several shelves of seedlings or clones on top of each other and simply tape LED strips on the bottom side of each shelf to light the plants below.

 

Why Are LED Strips Better Than Fluorescent Bulbs?

LED strip have four big advantages over fluorescent tubes:

  • They take up less space, so you can put them anywhere and they won’t get in the way
  • They use half the power, saving you money
  • They last longer, saving you money and the hassle of having to change bulbs more often
  • They emit less heat, meaning they can hang closer

That said, these strips are generally a bit less powerful (especially the flexible tape-style ones), so you’d mainly want to use them as supplemental light. If you need more power, I recommend a T5 LED.

 

Best LED Grow Light Strips: Reviews

These are the best LED grow light strips on the market. I’ll start with the best flexible tape style strips (first red/blue mix, then all-white) and then review three bar-style lights of varying lengths.

 

Best Flexible LED Grow Light Strip: AveyLum Adhesive LED Plant Light Ribbon

AveyLum Flexible Adhesive LED TapeAdhesive light strips are one of the coolest uses of LED technology and this AveyLum LED tape is easily the best grow light of this kind on the market.

You get a large roll that holds 16.4 ft (5 meters) worth of strip light. It has a ratio of 4:1 red to blue diodes, which is perfect for plants. The red ones have a wavelength of 660 nm and the blue ones have a wavelength of 445 nm.

The mix of red and blue makes these ribbons the perfect supplemental light during any stage of growth. Use them to supplement a larger grow light or natural daylight.

The AveyLum strip lights are not as well suited as a primary light for cloning however, since they only have red and blue diodes and no light in any other colors. As a primary light (for cloning or any other stage), you want a full-spectrum light, like the next light below.

The entire strip consumes 72 watts. You can cut the strip up and use separately. If you run them from the same adapter, you would need to then connect them with pin connectors. It is IP65 waterproof, which means they can withstand sprays and splashes.

In addition to the 3 lights, this package includes a power adapter. It unfortunately does not include the pin connectors you need to connect multiple strips, if you choose to cut them up.

AveyLum gives you a 1 year warranty with these lights and a 60 day full money back guarantee, making your purchase risk-free. Due to their flexibility, the AveyLum Adhesive Grow Light Strips get a Grow Light Info rating of 9.6 out of 10.

Pros

  • Flexibility means you can install them virtually anywhere
  • Adhesive back allows you to stick them to any flat surface
  • Red and blue diodes make for great supplemental lighting
  • 72 watts total power usage means very low electric bill
  • IP65 waterproof

Cons

  • Spectrum not suitable to be used as the primary lighting
  • No connectors included (if you want to cut up the strip, but run off the single adapter, you need to buy connectors separately)

 

Best Full-Spectrum LED Light Strips: Jun Wen White LED Tape

Jun Wen White LED Light RibbonFinding a quality full-spectrum LED grow light strip proved impossible, but there are tons of regular light strips (i.e. not specifically made to grow plants) available. Among them, the Jun Wen white LED strips are the best.

Since they are not made specifically for growing, they are not as bright and they do not have a protective sheath over the diodes like the previous light reviewed above, but they still work quite well. Just know that they are not waterproof like the ones above.

The Jun Wen light tape is available in two different spectra: a 3000K warm white light and a 6000K cool white light.

If you are using them as supplemental light, you’ll probably want the 3000K one, but it really depends on your needs.

If using as a primary light, you’ll definitely want the 6000K version, since it is better for veg/clone. While the 3000K one would theoretically work for flowering, it simply isn’t powerful enough to give good results, at only 16 watts per 16.4 foot strip.

Even for vegging or cloning, you’ll want to get a lot of these above the plants. I’d run the strip back and forth with very little space between each row, to completely cover the area above the plants, if I were vegging with them. That said, I would only use them for clones or seedlings, not veg. Get a stronger T5 LED bar for that.

The strips can be cut every three LEDs. There are marks on them showing where you can cut them. This allows you to separate them into multiple smaller strips, if needed.

A great feature that the lights above do not have is the ability to dim the lights. These light rolls come with a dimmer, so you can turn down the brightness whenever you don’t need as much light.

Jun Wen gives you a 2 year warranty on these lights and they will also replace your light for free or give you a full refund, if you are not satisfied. The warranty is longer than most lights in this price range.

Pros

  • Ultimate flexibility means you can install them virtually anywhere
  • Dimmable, so you can adjust brightness as needed
  • Full-spectrum white light works for any stage of growth
  • Warm white (3000K) and cool white (6000K) available
  • Adhesive back allows you to stick them to any flat surface
  • 16 watts total power usage means very low electric bill
  • 50,000 minimum lifespan means no bulb changes for years
  • 2 Year warranty

Cons

  • Not specifically designed for plants
  • No protective cover over diodes
  • Output is fairly weak compared to a true grow light, but works as a supplemental light

 

Best 16-Inch Plant Light Strip: Litever 45w LED Strip Kit

Litever 16 Inch LED Strip KitThe Litever 45 watt LED strip kit is different from the previous two lights above, in that the diodes are affixed on a rigid aluminum strip, instead of a flexible ribbon.

These lights are more powerful as a result, delivering 100 umol/m²/s at a height of about 7.5 inches above the canopy. That is sufficient to flower cannabis! The coverage area at that height is around 2 by 1.25 feet.

That said, I would not recommend these lights as a primary light for flowering. While they have enough power, it is just enough. Ideally you would want more. Of course you could always use more of these lights, but the real issue is the spectrum.

The Litever bars contain blue, red and IR diodes. That gives plants what they need for every stage of growth, but it lacks green and yellow light. Plants do a lot better when they get light in every color, though they do want mostly blue and red.

In short: the spectrum of these strips works fine, but it is not ideal.

That makes them perfect for use as supplemental lighting, in addition to a main light that contains at least some white light (which is made up of every color), or in addition to natural daylight.

They also work well as a light for the early stages of growth: seeding, cloning and even vegging.

When you buy this kit, you actually get 4 light strips. Each one is 16 inches in length. This gives you the flexibility to either use them as one long light, or to use them in parallel and create a more powerful “panel” of light.

In addition to the 4 lights, you also get a power adapter, 3 extension cables to connect the fixtures to each other (each is approximately 5 feet in length), an end cap to cap off the cable on the final light in your series, plus screws, zip ties and adhesive pads, so you have several options for installing the strips.

Pros

  • 3 installation options (cable ties, adhesive pads, screws) give you ultimate flexibility
  • Low power usage of 45 watts for all 4 bars combined
  • High output of 100 umol/m²/s at around 7.5 inches
  • Includes IR light

Cons

  • Spectrum contains only red and blue light, so not ideal as a standalone light (but it will work)
  • Aluminum the LEDs sit in can get quite hot to the touch
  • No warranty

 

Best 2-Foot Horticultural LED Strip: Monios-L T8 High-Output Integrated Bar Fixture

The Monios-L High Output T8 LED Strips cost quite a bit more than the other lights reviewed here, but you also get a lot more for your money.

You get 6 high-output light strips that use 24w each and are 2 feet long (or 42w and 4 feet long). You also get 48 inch connecting cords to connect the lights to each other (5 cords total) and three 5 foot power cords.

To install the lights, you get screw-in clips, zip ties and 3M adhesive pads. That gives you the option of attaching the lights 3 different ways, meaning you can put them just about anywhere.

Despite using only 24 watts (or 42 watts for the 4 foot version), these lights double the output of a high-output T5 fluorescent tube of the same length. They also emit less heat and last twice as long (at least).

These lights make wonderful supplemental lighting and are also well-suited for vegging, cloning or seeding. They can flower as well, but they won’t be powerful enough to maximize flowering yields.

They emit a warmish white light with a color temperature of 3700K. This mean you get light in every wavelength for a great full spectrum light.

As supplemental lighting, they work well to illuminate your plants from the sides or from below. If they are being used as a veg clone light, you’ll probably want to install several in parallel, to give a more powerful light and an even coverage.

Monios-L provides a 2 year warranty with the purchase of this set of horticultural LED strip lights. They also give you a 100% money back guarantee.

Pros

  • Includes 6 LED bars that you can use separately, or connect together using provided cords
  • 3 different installation options let you put these just about anywhere
  • High output while using only 24 watts (or 42w for the 4′ bars)
  • Included reflectors help focus the light
  • 2 year warranty

Cons

  • Higher price than the other lights reviewed, but a great value for 6 lights
  • Quite a bit larger than the LED ribbons reviewed first and second

 

Best 4-Foot LED Grow Bar: Kihung 42W T8 Grow Light Bar 8-Pack

When you compare the Kihung LED bar to the 4 foot version of the Monios-L bar reviewed above, this one looks more expensive at first glance. But you’re getting eight bars here, instead of 6.

And this light is more powerful, with an output of 200 umol/m²/s at a 12-inch height. If you don’t have much space and can’t install several bars, then this bar comes in really handy, since it gives you more output from a single bar than any other light on this page.

The other main reason to use this LED strip is the full spectrum white light. With a 3000K color temperature, it is a warm light that works great for flowering, but also contains plenty of blue wavelength light to make it good for vegging, too. It does not contain IR or UV light.

These bars also come with a removable reflector. The reflector makes the light larger, so it takes up more space, but it also adds up to 20% the the intensity of the light.

The box contains 8 light bars, four 59″ power cords, eight 48″ connecting cord and multiple hanging options: screws, zip ties or ring buckles. Having 3 options for attaching the lights gives you a ton of flexibility in how to use them.

The Kihung bar fixtures have a rated lifespan of 50,000 hours. They come with a 2 year warranty.

Pros

  • Can daisy chain up to 6 bars
  • Great full spectrum white light (3000K) for all stages of plant growth
  • Consume 42 watts
  • 3 different installation options let you put these just about anywhere
  • Included reflectors help focus the light
  • 50,000 hour rated lifespan

Cons

  • Larger and less versatile than other lights above
  • Higher price than the other lights reviewed, but a great value for 8 lights
Sours: https://growlightinfo.com/led-grow-light-strips/

Lights rope grow

And then a wonderful surprise for us - Natasha and Rita arrived, brought winter clothes and textbooks. They have a diploma defense and distribution in June. And the parents of Vanya and Natasha blew into the village - there in May their relatives always have a grandiose. Drinking bout, and they always bring smoked sausages from the village.

Since the girls had tear-stained eyes, Vanya and I began to calm them down and entertain, and quietly ask.

Cheap Custom LED Grow Lights - Under $100 for 360 Degree Lighting at 25K Lumens

I'm done, - I said, and unscrewed the vice, putting the coveted hairpin on the table. Uncle Yura took a step aside, flipped the switch and turned off the light. Come on, Sanka, get down on your knees, - the neighbor whispered quietly. I squatted down, and Uncle Yura pulled off his pants with panties, and offered me his penis. Don't be afraid, suck it first, you should like it.

Now discussing:

He records all our meetings, rehearsals, partying with a camera and catches with a camera lens. Kirill, our second guitarist, is the son of the director of a distillery. That is why we almost always have free alcohol in unlimited quantities. The song is replaced by a calmer one and Maxim - our keys - calls us to drink.



1498 1499 1500 1501 1502