Cva knife kits

Cva knife kits DEFAULT

WoodRiver - Fixed Blade Tanto Point Knife for Hunting and Fishing - 11-1/2" - Unfinished Kit

  • 5.0 out of 5 stars

    bySKon

    Great Blade

    I ditched the rivets and ground off the ridges. Then I reworked the tang to fit through a Bear's head finger guard and attached it to an Elk horn brow tine. It made a super fantastic knife. Too bad I can't upload a photo, it's one awesome looking, functional knife. I made it as a gift and the owner said they use it all the time!

  • 5.0 out of 5 stars

    byHR from Kitty Hawkon

    Gorgeous

    This knife is bar far one of the slickest looking useful knives I have made. The edge is extremely sharp and the heft is perfect for those jobs that demand some serious hand-held real estate like fish, wild game. Tantos are beautiful knives in the first place because of the elegant design, but create your own handle and it is guaranteed to be a collectible keepsake. The Woodcraft price is the best I have found. ~Hugh Rardin

  • 3.0 out of 5 stars

    byMN from Clearwateron

    Finger too close to the edge

    I just finished one of your Tanto kits. The build and finish were straight forward enough. Looks nice. But, when I showed it to some people who used knifes, the first thing they said was, "you are going to cut yourself if you stab something with that". The finger cutout is right at the cutting edge of the blade. I am going to file down the first 1/2 inch of the cutting edge to make this knife safer. I have another kit and plan to modify the scales to cover that part of the blade. It really should be redesigned, for safety.

  • 3.0 out of 5 stars

    byJF from SUNNYVALEon

    ditch the threaded rivets

    Knife itself is nice, a great value. Threaded rivets are not worth the hassle. To use them you have to thin the handle stock so they can sit on top or countersink each side of the handle exactly so that the threads meet but are not loose. With typical 3/8 scales that means counter sink depths of 1/8 to 3/16 per side. Make sure you have a drill press or a tight stop collar on your bit for countersinking and a very sharp bit to avoid tearing out the hole. Much easier to pay a couple of dollars for steel or brass pin stock that can simply be cut to length and sits flush with the surface.

  • 5.0 out of 5 stars

    byJKon

    Couldn't be more pleased!

    I ordered the Tanto, the Spear Point and the Skinner. These blades are very substantial and arrived on the day promised. What an incredible value at $9.99 each but are worth the full price. I can't wait to complete these.... heading to Woodcraft tomorrow to pick out some dimensional exotic wood! Thanks Woodcraft! Very pleased with you guys!

  • 5.0 out of 5 stars

    byDavidon

    Awesome knife kit

    What makes this kit great is that you can finish it in a weekend! It is a quality knife kit and fun to make. You do not need the countersinks, as I used drill bits from an index, just use calipers to find the right sizes. If you do not have a drill index, then countersinks to match may be the way to go, but I have not used them. Thanks for reading!

  • 5.0 out of 5 stars

    byAustinon

    Great kit, well balanced knife

    I use the knife primarily as a work tool, but its balance and, so far, edge holding ability is excellent.

  • 4.0 out of 5 stars

    bytambor333on

    Reasonable knife kit.

    This knife kit is pretty solid. I was not a fan of the rivets supplied so I am using just using peened steel rod instead. The blade does show signs of tool marks but its nothing a few passes with sandpaper could not fix. I am using paduk for the scales I do wish there was a model with a steel or brass bolster.

  • 5.0 out of 5 stars

    byLAN7755on

    Tanto just the best fixed blade availabl

    These are some of the best Knife Blanks available

  • 4.0 out of 5 stars

    byJerryon

    Great Knife Blade

    This is really a great blade! I would have given it a 5 rating if came with almost ANY other pin type for attaching the scales. Corby rivets, Loveless bolts or even plain old compression rivets would be a better choice in my opinion. Overall, the blade is well made of heavy stainless steel of seemingly good quality. I didn't use the lanyard hole but it's there if one wants to install one. I would recommend this knife to anyone.

  • 5.0 out of 5 stars

    byBTon

    wonderful blade to ad your own handle

    This blade is strong, durable and very well made...it is worth the money!

  • 5.0 out of 5 stars

    byP2on

    Great kit

    Easy to work with,everything came together for a great fit.

  • 3.0 out of 5 stars

    byOuzelon

    very nice looking

    I only have had time to look at this blade because less then a week from delivery my shop burned down. so its still on my desk.

  • 5.0 out of 5 stars

    byMikeon

    Lots of fun

    This is a fun simple project that can be done by a beginner with limited tools. I completed this with the countersinks, epoxy, clamps, and file set.

  • 4.0 out of 5 stars

    byRedhushon

    excellent knife kit for the price

    the screw together rivets have small heads that were almost useless unless (I assume) you buy their special stepped bit. I will be using squeeze rivets with their larger heads

  • 5.0 out of 5 stars

    byDarthKenbobon

    Awesome knives!

    These are awesome knives!

  • 5.0 out of 5 stars

    byTomon

    Nice starter knife kit

    The only draw back is that there are no "alinement pins" included for the handle sides, I had to "make" alinement pins using nails, 2 different size pieces of (color coded) rod that fit the holes in the blank would greatly aid in the alinement and drilling

  • 4.0 out of 5 stars

    bystingrayon

    good product

    good product

  • 5.0 out of 5 stars

    byClose Quarters Combaton

    I bought 2 Tanto's good knife

    I like the knife I bought 2 of them to build for my self and I sold both of them so I am going to pick up 4 more of them so I could have one for my self.

  • Sours: https://www.woodcraft.com/products/tanto-style-knife-kit

    Internet Premium : 18%
    Participation Requirements: Valid Credit Card required for bidding approval
    Payment Options: Visa and MasterCard
      Visa    MasterCard  
    Payment Instructions: *NOTE: ALL ARTWORK MUST GO TO 3RD PARTY SHIPPER, WE DO NOT SHIP ARTWORK. PROXIBID WILL SEND INVOICE RIGHT AFTER AUCTION. WE WILL UPDATE INVOICE ON MONDAY AFTER AUCTION. IF YOU ARE THE SUCCESSFUL HIGH BIDDER, WE WILL CHARGE CARD ON FILE --IMMEDIATELY AFTER AUCTION. YOU WILL RECEIVE A COPY OF YOUR INVOICE IN YOUR SHIPMENT WITH THE ITEMS. SHIPPING WILL BE BILLED SEPERATELY, AFTER ITEMS ARE PACKED. We accept ONLY 'MASTERCARD OR VISA' . PLEASE HAVE A GOOD CREDIT CARD ON FILE. WE WILL BE CHARGING A HANDLING CHARGE, IF WE HAVE TO KEEP GOING BACK AND TRYING TO CHARGE YOUR CARD. FUNDS NEED TO BE AVAILABLE. We will have to place a NON PAYING bidder status on PROXI if items are not paid for within 4 days. Proxi payments are due no later than Friday AM or NON PAYING bidder goes into effect. Shipping charges will be Charged for the exact shipping, insurance and materials separately on your card. Local pickup is available starting on Tuesday after the auction. Material fees are $5 for small lots and $10 for larger lots, firearms and multiple item groupings. All firearms have to be shipped in hard cases to prevent damage in shipping. Large hard gun cases are $30 ea. Handgun hard cases are $15. Customer may ship cases back to us for a full refund of the case charge. Large antique weapons that don't fit a normal gun box, will be charged extra for oversize. All items left on hold due to buyer not providing proper information or FFL info needed for shipping, will be resold after 30 days and commission will be charged. All UPS damage claims have to go thru us and items need to be returned and inspected by UPS. Photos need to be sent immediately prior to us filing a claim for any damaged merchandise. Buyers must co-operate with us in order to process the claim. Buyers refusing to send items back or disputing credit card after receiving merchandise will be held as a fraudulent transaction are charged with possession of stolen property. All auction transactions are sold AS IS and NO REFUNDS.
    Currency Type: USD
    Shipping Instructions: WE USE UPS SHIPPING. We try to ship all items within 24 hrs of cleared payment and received FFL. We charge a minimal fee for our staff to pack and wrap your items. $5 per lot for smalls and $10 per firearm or multi item larger lots. Oversize may have to go to 3rd party shipper. All firearms will have a hard case added for $30 for long guns and $15 for handguns to protect from shipping damage. When items are put into UPS labeling, we verify shipping cost and charge exact shipping plus cases and materials. Please call with any questions on shipping. Our Proxi bid customers have been extremely happy and surprised by our fast shipping. UPS does not pickup Sat. or Sun.
    Preview Date & Times: PREVIEWS ARE FRIDAY AND SATURDAY 9 am TO 5 pm prior to auction day. Auction day we open at 9am. PLEASE FEEL FREE TO CALL US PRIOR TO AUCTION DAY AND WE WILL INSPECT AND DESCRIBE ANY ITEM YOU HAVE QUESTIONS ON : PACIFIC TIME: 619-579-9140
    Checkout Date & Times: LOCAL PICKUP IS ALWAYS WELCOME ON INTERNET BIDS AND LARGE ITEMS. PLEASE CALL TO MAKE ARRANGEMENTS. 619-579-9140
    Location: 12062 Woodside Ave, Lakeside, CA 92040
    Driving Directions:

    Special Terms

    All property is sold AS IS, ALL SALES ARE FINAL. Property is open to thorough public inspection during preview on Friday and Saturday prior to auction day. It is the Bidder's responsibility to determine condition, age, genuineness, value or any other determinative factor. Past & Present Collectibles may attempt to describe the merchandise in advertising, on the Internet and at the auction but makes no representations. In no event shall Past & Present Collectibles be held responsible for having made or implied any warranty of merchantability or fitness for a particular purpose. All expressions of grade, condition, and authenticity are only our opinions, and no warranty or guaranty is made. Bidder shall be the sole judge of value. All sales are by lot number listed in catalog. If the quantity is greater than '1' the amount bid will be times the money. No lots will sell out of order and no lots will be broken. The auctioneer shall regulate the bidding. We reserve the right to reject any bid not believed by us to be in good faith. In the event of a dispute concerning a bid, the decision of the auctioneer is final. AGAIN, THIS IS AN AUCTION. ITEMS ARE SOLD 'AS IS' NOT A SALE WHERE ITEMS CAN BE RETURNED AFTER RECEIVING AND DECIDING THAT YOU SPENT TOO MUCH, OR YOUR SPOUSE DOES NOT WANT YOU TO HAVE TOO MANY FIREARMS...OR ANY OTHER EXCUSE, ALL SALES ARE FINAL, CREDIT CARD SALES ARE FINAL SALES, AS IS....NO CHARGE BACKS, NO RETURNS! All Firearms are sold as collectible. We expressly disclaim any warranty concerning the condition, functioning or safety of any firearm offered for sale. California FFL dealers must have copies of their licenses and dealer number to be able to obtain firearms. Out of state dealers will have to supply necessary FFL paperwork. Individual buyers will have to abide by all Federal and State laws to obtain purchased firearms. IF YOU ARE AN INDIVIDUAL BUYER ON PROXIBID OR OUT OF STATE, PLEASE HAVE A COPY OF THE FFL FAXED TO US RIGHT AWAY, IDENTIFYING YOU AS BUYER WITH YOUR PADDLE, BID # AND ITEMS YOU BOUGHT. FAX: 619-328-1615; WE TRY TO SHIP AUCTION ITEMS OUT WITHIN A WEEK, THEREFORE IT IS NECESSARY FOR YOU TO PROVIDE THIS INFORMATION RIGHT AWAY. Bidders who bid from off site and are not present at the live auction or preview understand and acknowledge that they may not be able to inspect an item as well as if they examined it in person. It is the Bidder'S responsibility to determine condition, age, genuineness, value or any other determinative factor. Past & Present Collectibles shall endeavor to describe in detail each item and any pertinent information about it. Past & Present Collectibles will not be responsible for any errors or omissions in the description of the merchandise unless it is a material and intentional misrepresentation of the item itself. Bidder agrees that everything is sold as is and that they may not return any item they purchase. Past & Present Collectibles is providing Internet pre-auction and live bidding as a service to Bidder. Bidder acknowledges and understands that this service may or may not function correctly the day of the auction. Under no circumstances shall Bidder have any kind of claim against Past & Present Collectibles or anyone else if the Internet service fails to work correctly before or during the live auction. Past & Present Collectibles will not be responsible for any missed bids from any source. Internet bidders who desire to make certain their bid is acknowledged should use the proxy-bidding feature and leave their maximum bid 24 hours before the auction begins. Past & Present Collectibles reserves the right to withdraw or re-catalog items in this auction. All Proxi bidders must be responsible to verify their maximum bids and any errors must be brought to Proxi 's attention. Past and Present Collectibles cannot remove your bids, you must do all bidding thru Proxi. Firearms clause: As stated above all State and Federal laws apply. Firearms packing and shipping will be seperate from the hammer price. Firearms will not be shipped Internationally. BUYERS WHO DO NOT OR CANNOT TAKE POSSESSION OF THE ITEMS THEY PURCHASE: If a bidder is unable to receive an item purchased because he is denied transfer of a transfer under legal restriction, or is unable to successfully arrange export or import of an international purchase, or for any other reason not solely Past & Present Collectibles' fault, the buyer is still responsible for payment in full to Past & Present Collectibles for the gavel price plus applicable buyer's premium & additional expenses. The buyer may request shipment at the buyer's expense to an FFL dealer to resell a gun on the buyer's behalf. If buyer does not notify Past & Present Collectibles of such arrangements within 10 days of the auction date, Past & Present Collectibles may resell the lot at a future auction, charging the buyer the current standard seller's commission for doing so. In the event a dispute arises, related in any manner to the auction or the property purchased, buyer agrees with us to submit the dispute to final and binding arbitration in the City of El Cajon, San Diego County, California. No party shall be entitled to attorneys' fees or costs. Our liability shall be limited to the total of the bid price, buyer's premium, sales or use taxes and, if applicable, license or transfer fees.

    Sours: https://www.proxibid.com/CVA-KNIFE-MAKING-KITS-UNOPENED-ONE-CVA-SKINNER-KIT-WITH-440-BLADE-AND-APPE/lotInformation/19178260
    1. Wawa cheeseburger price
    2. Kcmo city clerk
    3. Free scrapbooking clipart
    4. Bone histology quiz

    iKnife Collector

    CVA (Connecticut Valley Arms) was a pioneer company that brought back the black powder shooting sport in the early 1970s. CVA was originally located in Haddam, CT, along the Conn. R., hence their name. They started with reproductions of traditional American muzzle loaders like the Kentucky Long Rifle and offered them in finished and kit forms. All the firearms were made in Spain and packaged in CT. I don’t know if the finished guns were assembled in Spain or CT.

    In the late 70s they got into marketing knives. They called the series “Trail Knives” and they were modeled after traditional frontier knives. These knives were as authentic as possible and they were sold only in kit form. The Trail Knives were affordable, easy to assemble, well made, functional, comfortable in the hand and were quite impressive. The parts were made in Italy or Spain depending on the knife style. I’ve heard later they were made in Taiwan but I can’t verify that. These knives were offered from about 1979 to the mid-80s when the company moved to Georgia. The picture below shows the models available in 1980. The most popular seems to have been the Trade knife which looks similar to J. Russell & Co.’s Green River Works.  All the knives are etched CVA but only some of them have the country – Italy or Spain – marked on them.

    The Trade knife pictured below has no country marking on it and I’m wondering if the blades did come from Green River.  I started assembling this knife twenty-two years ago! I picked up the kits when they were first offered and assembled a few. I must admit I was more enamored by CVA’s knives then by their muskets and pistols. I guess that’s the knife collector in me!

    The knives are German 440-C stainless.  CVA’s instructions say that if desired “…rub the blade with either onion, tomato juice, mayonnaise, or lemon and let it sit overnight. You’ll notice in just one night that the blade will begin to age.”

    Personally I’m impressed by the Bowie and Boot models. The Bowie, Boot and Toothpick models are readily available even today and can sometimes be found in kit form on line @ eBay for example. That’s probably because they were purchased more for show. I had a Boot knife on display next to the Lenox in the china cabinet. That didn’t go over too well at first but no one ever inquired about the Lenox as far as I know. :)

    After the Trade knife the Skinner seems to have been the most popular because it probably was the most functional. I’ve never seen it offered in excellent condition today. All have been sharpened, well-used and a few are well ground down.  What I NEVER see now is the Hunter model pictured on the far right (in the second picture above). That’s the mystery model of the group, at least for me. A lot of times the Bowie is listed as a “Hunter”.

    Sours: https://iknifecollector.com/profiles/blogs/cva-knives
    How To Build: The Drop Point Hunter Knife Kit by KnifeKits.com

    To you where I spend it. This is my money. You have a boyfriend, so let him buy you gifts.

    Knife kits cva

    Boris on his knees crawled up to Larissa and pressed his lips to the pubis. The girl spread her legs and let his tongue penetrate between the pink, swollen lips. She stifled a groan and pushed him away, quickly put on her panties and commanded Come on, open your mouth, take it deeper. - the man obediently unclenched his jaws and lacquer-black, like a ripe eggplant from Burkina Faso, the monster entered deep into.

    His throat.

    How to Build: The Sheriff Lockback Knife Kit by KnifeKits.com

    I came in next. The ride passed in silence. I only imagined what would happen tonight, from this my penis became hard as a stone. The elevator doors opened, you quickly left and walked into the restaurant hall. The time was already about 22 hours, so there were not many people, mostly men.

    Similar news:

    There was no doubt about the need. A couple of questions to herself: why and why. The answers are near - I want to compare my reaction to His stories and to His real one. Why not Yes.



    1436 1437 1438 1439 1440